DOLZ offers a selection of water pumps valid for Volkswagen Group vehicle models, that is, Audi, Seat, Škoda & Volkswagen brands with the possibility of being purchased with or without back housing.
These water pumps have an outer shell that encases the water pump, the back housing, which incorporate the thermostat and the temperature sensor, precisely directing the coolant flow.
During fitting, some things must be considered so that the assembly is carried out professionally and thus avoid future breakdowns. Therefore, in today’s article we learn about best practices and see in detail an overview of the DOLZ water pump with back housing range for Audi, Seat, Škoda and Volkswagen applications.
Best installation practices for water pump housing Audi, Seat, Škoda & Volkswagen:
The lifespan of this component arose depends on the maintenance that we will carry out on the complete cooling system, including the water pump and its associated elements, also the quality and choice of the refrigerant, and it stood out from the fact that the pump was assembled in effective way.
In many cases, the failure of these water pumps is due to errors during the installation process and not due to the quality of the component itself. For this reason, the key points during assembly that we consider essential are:
- The seal must never be oiled, otherwise the function of separating the “wet” and “dry” zones of the water pump will not work correctly and it will contaminate it, considerably reducing its lifespan.
- Avoid the use of additional sealant. From DOLZ we always inform that the use of sealant is only necessary in those references supplied without a gasket.
- Observe the specifications for tightening, sequence of tightening and recommended tightening torque values. It is essential to follow the correct order of screwin
- g in the bolts and the tightening torque so that the water pump does not suffer a breakage.
- Last but not least, these pumps are supplied with a yellow rubber protective cup over the pulley ventilation wings. It is essential that this protective cup is only removed after assembly has been completed.
DOLZ water pump back housing range summary
Our water pump with/without housing range from Audi, Seat, Škoda & Volkswagen includes the following part numbers:
WITHOUT housing | WITH housing | OE numbers |
A221 | A232 | 06J121026B – 06J121026G – 06H121026G |
A231 | A282TM (metal backhousing) |
06H121026AG – 06H121026BF – 06H121026CC |
A231 | A282TP
(plastic backhousing) |
06H121026AG – 06H121026BF – 06H121026CC |
A243 | A244 | 06H121026BA – 06H121026CF – 06H121026CQ |
A233 | A281 (with belt) |
06K121011B – 06L121005A – 06L121011B |
A259CN | A260CN | 04E121600R – 04E121600AN – 04E121600BK |
A259CN | A264 | 04E121600BA – 04E121600CG – 04E121600BP |
A234 | A235 | 04E121600AD – 04E121600AR – 04E121600BE |
A234 | A239 | 04E121600P – 04E121600AH – 04E121600AF |
A234 | A247 | 04E121600AQ – 04E121600AG – 04E121600BG |
A234 | A248 | 04E121600AM – 04E121600BC – 04E121600BJ |
A234 | A262 | 04E121600AL – 04E121600BD – 04E121600CB |
A237 | A238 | 04E121004F – 04E121004J – 04C121600J |
Among them, we highlight A282TM water pump, whose back housing is metallic, which means greater resistant to cracking and a lower chance of breakage.
Also noteworthy, A281 water pump with an auxiliary belt and a thermal management module integrated, managing to reach the optimal operating temperature in a short period of time and with high precision.
Related content: Water pumps with & without back housing
Dolz provides a comprehensive solution by supplying with each water pump all the necessary components for mounting (gasket, cover anchor bolts, etc.) ensuring that proper operation is achieved, minimizing the possibility of breakdown and wear after replacement.
Do you need spare parts? Do you have doubts about our product lines? Don’t hesitate to contact our team by sending an email to dolz@idolz.com.