The automotive water pump is a simple centrifugal pump that is driven by a belt connected to the engine’s crankshaft. The pump circulates the fluid when the engine is running. The water pump is vital to the operation of a car engine as it ensures that coolant flows through the cylinder head, radiator, hoses, and cylinder block and maintains the optimum automotive operating temperature; it is usually driven by a belt from a crankshaft pulley or sprocket.

An automotive water pump uses centrifugal force and impeller blades to move coolantthrough the various hoses and channels that make up the cooling system. After the coolant flows around the engine, usually at the front of the car, it is hosed to the radiator, where the hot coolant is cooled by air movement along with the radiator fins. It then leaves the radiator and returns to the water pump, where the process starts over.

 

Different types of automotive water pumps

 

In order to know water pumps in detail, it is essential to know how to differentiate between the different types that exist. On the one hand, it is possible to differentiate between water pumps for trucks/industrial vehicles and passenger cars, each one adapting to the specificities of each vehicle. While, on the other hand, they can be categorized as follows:

Mechanical water pumps

 

In mechanical water pumps, the coolant absorbs heat from the engine block and cylinder head and releases it to the ambient air through the radiator. Depending on the type of construction, mechanical water pumps can be seated in the pump housing itself on the outside of the engine, or they can be seated directly on the engine block. Generally, mechanical water pumps are driven by V-belts, timing belts, or directly from the engine.

 

Variable water pumps

 

The main peculiarity of variable water pumps is that they allow the flow rate to be varied depending on the needs of the engine, this is done through a vacuum process. That is, the water pump acts on the cooling system only when necessary. In this way, it helps to increase the efficiency of the engine, which translates into lower fuel consumption and, therefore, a significant reduction in pollutant emissions into the atmosphere.

Electric water pumps

 

Electric water pumps help reduce emissions from modern engines. A supply flow independent of the number of revolutions of the motor enables cooling according to needs. This reduces the power required and therefore reduces friction losses, fuel consumption and emissions of pollutants.

Auxiliary water pumps

 

The main function of the auxiliary water pumps is to support the main water pump. However, the auxiliary water pump is more focused on comfort, since it is located in a by-pass hose of the main cooling system, and drives the coolant to the heater inside the car.

Some vehicles may have more than one auxiliary pump, depending on the complexity of the cooling system.

These auxiliary water pumps are also used in hybrid and electric vehicles in order to bring coolant to all corners of the system, since the batteries are also cooled, as are the electric motors.

 

Read more: “Discovering the main water pump components

 

Electric or mechanical water pump? Which is the best?

 

Each water pump has its own advantages; compared with the mechanical water pump, the speed of the electric water pump is independent of the motor speed and can operate flexibly according to the actual cooling demand of the motor. Thus, heat transfer and mechanical losses are reduced; thus, fuel consumption is reduced, and efficiency is increased.

The electric water pump has good corrosion resistance and high-temperature resistance. The electric water pump provides high efficiency, precise control, timely and appropriate cooling capacity, the low power consumption of the coolant flow based on the water temperature and other information, shortens the coolant flow distance, and reduces the displacement of the water pump about 60%.

Reducing friction, the electric water pump is driven by electricity, compared with a mechanical water pump using an auxiliary belt drive, the friction work is reduced.
An electric water pump, in contrast, allows the manufacturer to set (with much greater precision) how much coolant flows through the engine at specified temperature ranges. So it’s actually more efficient and more tailored to your engine’s specific cooling needs.

 

Dolz, manufacturer of different types of water pumps

 

Industrias Dolz, with over 80 years of history, is a world leader in the manufacture of water pumps for the spare parts industry. Dolz has always produced high-quality water pumps for cars and trucks, which allows us to offer different types of water pumps, mechanical, electric, variables and auxiliary, with the longest experience on the market. So if you are looking for the best water pump for your vehicle no look further, Dolz has a great range water pump that suits all your automotive needs. Contact us for further information.

 

cta contacto